Hyd unit is way to go. Grooves are clean. Flaring regular old brake line, zinc coated. Dude, I had the same problems. Flag down the Snap On truck, give him 40 bucks, and be done with it. Yody- I was having the same issue with my Snap-On double flare tool trying to get a good flare on stainless line. I ended up doing the following: Put the cut, filed and chamfered line into the clamp, measure the shoulder height for the flare, and then tighten the clamp closest to the line first, then the clamp further away from the line.
Then take a screw driver and go turns past where you can hand tighten the wing nut clamps the brake line I used was stainless, don't do this with standard steel, or you will crush it. Take a black marker and mark the under side of the line to check to see if it is slipping as you do the first flare. After I used the screw driver to get leverage on those wing nuts, it was smooth sailing, and I had perfect double flares with no slipping. I did put it in the vise first, maybe i was overtightening it?
I have found with steel lines, I tighten the clamp furthest away from the line, the tighten the one closest. Since doing this, I have not had any slippage like I had before. I have done close to 30 flairs this way and it was with a NAPA brand flairing tool. If it is the later go to Home Depot and get the other.
Also lube that little die and DO NOT tighten down or it will get stuck in the tube and can break off. Hyd unit is way to go. Grooves are clean. Flaring regular old brake line, zinc coated.
Contact Us Welcome to Pro-Touring. All times are GMT The time now is AM. These tools are built to reduce friction for smooth results and last you throughout many uses. Together, these seven pieces give you what you need to create double flares in brake line tubing with copper, aluminum, brass, magnesium, or soft steel.
The forged yoke is made with premium heat-treated steel, and the swivel is made from alloy steel with chrome plating. These tools offer durability for repeated use over many years, and they can help you achieve smooth, perfect flares in almost all types of brake lines. It includes the tools and adapters you need to create both double and single flares. You can even create bubble flares with this tool kit, and it covers sizes 4. This set of brake line flaring tools gives you everything you need to create single, double, and bubbles flares in your garage.
The tools are made out of heavy-duty steel to give you long-term durability, and they have a chrome-plated finish to protect against wear, tear, and corrosion. That finish also helps to reduce friction. These tools will work to create single or double flares on copper, aluminum, magnesium, brass, and soft steel tubing.
And you can take them beyond your brake lines; they can be used for HVAC systems and other automotive needs. It equips you to make both double and bubble flares, bending both brake and fuel lines as well as pipes and more. With a fixed head and several adapters, you can create clean, precise flares. But trying to decide which brake line flaring tool is the right choice for your needs can be complicated.
There are a lot of tools with a lot of different accessories, features, and benefits. And quality can vary between tools by quite a lot. From versatile flaring tools that can do it all to simple, straightforward tools that do one job very well, you have quite a few choices and options.
Follow our brake line flaring tool buying guide to make sure you pick out the perfect set of tools. Do you need a brake line flaring tool? When problems arise, you must diagnose them and fix them before they cause dangerous problems on the road. Additionally, a brake line flaring tool can be quite versatile. The type of tool determines what kinds of flairs it can create. You can choose a tool that offers just one type of flare, or you can opt for one that does double duty with multiple types of flares possible.
These tools allow you to make quick flares, and they tend to be ideal if you need a simple single flare on your line. A single flare tool may not fully meet your needs, and it can come with limitations if you need to create a different kind of flare. These types of brake line flaring tools are also often made to work solely on specific materials, like brass or soft steel.
0コメント