We offer a day Money-Back Guarantee on all our products except a handful of that are custom-built per order - there'll be a note anytime that's the case.
That means if you're unhappy with your purchase in any way, you can simply initiate a return online and send it back to us for a complete refund. Our guarantee is just that: we won't mess you around, we'll just make it happen. Contact us at or email us at [email protected] if you have any questions about the manufacturer's warranty. Buying from Waveform gets you free, unlimited help from our team of signal experts. Our signal engineers have been helping customers improve their signal for over 10 years.
No matter what your question, we're here to help. We don't just sell you a product - we sell you a solution, and we stand by each and every product we offer. This unit will improve voice, 2G, 3G and 4G data services for any network in an area of up to , square feet, depending on the model chosen.
The zBoost TRIO is easy to install and use, and comes with everything you need to improve cell phone reception in your home or office. Next, you'll need to determine where to locate the amplifier and inside antenna.
Ideally, you want it located in the center of the area where you want the boosted signal. You also want to keep it away from large metal objects or wiring that could interfere with the signal.
Run the coax cable from the outside antenna to this location and then attach it to the amplifier. Attach the inside antenna to the amplifier unit and then plug in the AC power supply. After a few seconds, you should see a green light indicating that the amplifier is working properly. If you see a red light, or if it's alternating green and red, check the included manual for troubleshooting steps.
It's likely that your inside and outside antennas are too close together which results in feedback causing the amplifier to shut down.
For more details instructions, watch the video above or check out our complete YX Installation Instructions page. Check items to add to the cart or select all.
We're here to help: Menu Search Account. Cart You have no items in your shopping cart. Search: Search. Account Blog Log In. It can be used with its supplied whip antenna to find the best location for antenna mounting with the strongest received signal.
It can also be connected to the directional antennas to aim the antennas for maximum received signal. When attaching the cable to the antenna, run the cable away from the antenna. Avoid draping the coax near the antenna.
When you have determined the location of the strongest signal, install the External Antenna to a mast or pole not provided. Loosely connect the antenna to the mast to allow the antenna to be reoriented for strongest signal.
To get the maximum benefitt, you will want to take special care in aiming the antenna in the direction of the best signal for your wireless service provider.
You may wish to use a YX RF signal meter to help during this process. Once you have determined the optimum location and angle, secure the antenna, ensuring that the antenna remains parallel to the ground and that the two holes on the side of the antenna are facing down. Connect the Indoor Antenna to the Base Unit and place it where you need signal. For the widest possible signal area, position the Base Unit near the middle of a room.
You may also mount it on an interior wall by first removing the silver bracket, screwing the bracket to a wall screws not provided then snapping the Base Unit back in place keeping the Indoor Antenna vertical.
This Base Unit uses an omni-directional antenna that delivers signal in a circular pattern around the antenna. Keep the Base Unit off the floor and at least 2 feet away from other cords, metal objects or other wireless devices such as wireless routers or wireless access points.
The zBoost performs best when there are no obstructions between the zBoost Base Unit and your mobile device. Generally, increasing this distance up to 40 feet will increase the performance and decreasing the distance will limit zBoost performance.
To run the cable from exterior to interior through a window, an 8 inch window-entry cable is available for purchase Part: YXW.
Should you need additional cable length, 15 foot extensions Part: YXW are available. Please note: Cable longer than 65 feet is not recommended.
When your zBoost system is in place and fully connected, walk throughout your home or office and verify that you are able to reliably place calls. If the signal strength has improved, your zBoost is working.
Remember, coverage varies based on outdoor signal level, building construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and building materials. Adjustments may be needed to optimize performance.
If you find the increased signal coverage is acceptable, however, no additional adjustments are needed. Can you tell me if there is are upgrade antennas for the indoor zBoost Base Unit?
Product Details Specs Product Details. Details Get more out of the Wi-Ex zBoost YX amplifier with the directional panel signal boosting kit, which includes a dual-band directional outside panel antenna for low signal areas and increased coverage.
Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer.
Antennas MUST be installed at least 20 cm 8 inches from any person. E location information may not be provided or may be inaccurate for calls served by using this device.
0コメント