If you do not want to change this value, click Cancel to exit without saving any changes. You will notice that the data shown to the right of the IpEnableRouter now appears as 0 x 1 instead of the default setting 0x 0. Click File Exit. If you've made changes, you will not be prompted or reminded and there is no File Save As command available.
For this reason, it is important to back up your registry file before making changes if there is any doubt at all about working in the registry.
Dynamic routing occurs when routing tables are automatically and periodically updated. Dynamic routers rely upon routing protocols.
RIP was originally designed for use on classful networks. RIP is a distance vector routing protocol and determines routes based on number of hops how many routers it must pass through. Any route more than 15 hops away is considered unreachable. For this reason, RIP does not scale well to large networks. RIP routing tables are dynamically updated using a route-advertising mechanism. The method of dynamically updating routing information is through link state advertisements LSAs that have information containing both the connected networks and their costs.
The cost of each router interface is determined by the administrator in order to use best connections first.
The combined cost of a connection using this classless routing protocol must be less than 65, A Windows Server computer can be configured as a dynamic router, using either of these protocols.
In dynamic routing, default routes are seldom used. If there is a scope for The other scope, That's simply how DHCP works. If you want to setup a scope for If you have a So what I did was setup the modem on the internal network plugged into the modem's WAN port, and gave it an IP, such as. The "internal" side of the modem was the familiar.
So in essence, the modem was acting as a NAT device between the. Worked like a charm. I even configured the wireless on that private modem network for guest users, since it was secluded and they couldn't mess with the video traffic.
This post is provided AS-IS with no warranties or guarantees and confers no rights. Maybe a Visio of my network will help. Firstly, would you please post a Network Topology Map?
Based on my experience, you can achieve it. If there is no misconfiguration, it would work as you imagined. I recommend you delete the superscope and set the two scope separately to see if the issue persists. In addition, you can refer to the thread below:. Besides, the links below may be helpful to you:. Understanding relay agents. Best regards,.
Susie Long. However, when I use that machine to browse to the outside world e. I don't expect the server to know the difference, of course, since it sees both as Mbps up to each switch, and I didn't do anything special yet to tell it which one to prefer.
My question is: How can I configure the server so that it prefers to talk to the outside world on the connection that leads to the 3Mbps DSL modem's switch? I seem to remember there being precisely that kind of option - perhaps on an earlier version of Windows? How do I change that to be the DSL modem router Here's the "route print" output from the server which is itself How do I effect what I want? Thank you. Rob Williams. Most Points The Distinguished Expert awards are presented to the top veteran and rookie experts to earn the most points in the top 50 topics.
Join our community to see this answer! Unlock 1 Answer and 6 Comments. Andrew Hancock - VMware vExpert.
0コメント