Once all the connectors are plugged in follow the included instructions to program the module and you are ready to go! Operating your remote start is simple. From your factory remote fob press the lock button 3 times to activate the remote engine starter.
The parking lights will flash and the truck will start and run for the preset time typically 15 minutes. Pressing the lock button 3 more times will shut the truck off. Be sure not to press the lock button too fast or too slow the timing may take a few tries to get used to. Free DIY programming instructions including instructional video are included below in this article. Key out of the ignition. Insert and remove the key from the ignition switch 2 times within 5 seconds. NOTE: Steps 2 and 3 should be performed within 40 seconds.
Insert the key into the ignition and remove it. NOTE: Steps 4 - 6 should be performed within 40 seconds. Within 10 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted Repeat steps A and B in step 6 for each new remote. Alternate programming procedure: Have all remotes for the vehicle ready.
Toyota Avalon vehicles use step 10a, all other vehicles use 10b. Make sure all doors are closed 2. Insert key into ignition, then remove it 4. Have a question for us? Reach out! We're here for you.
We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
0コメント